NOTE: The sponsor of this content may contact you with more information on this topic. Click here to opt out from sharing your email address with this sponsor. (This link will not unsubscribe you from any other BIC email list).
Industrial firefighting isn't like municipal response; the environments, site-specific hazards, facilities, and access areas can all be different – and post a unique set of challenges. There are different rules, personnel, business priorities, and equipment that are specific to industrial firefighting that can be
challenging for local municipal responders should an incident occur. So regardless of whether your plant has its own fire brigade or relies on assistance from an outside fire company, planning ahead and establishing relationships with your local fire departments may eliminate delays, and overcome challenges and barriers when responding to an industrial fire alarm.
Fire Brigade Standards
Before getting into the specifics of creating alliances with local responders, it’s important to know and understand the standards and best practices governing employer-established fire brigades. Both the U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) and also the National Fire Protection Agency (NFPA) have specific standards. OSHA Standard 1910.156 establishes the requirements for policies, training, equipment, and personal protective gear, such as a self-contained breathing apparatus (SCBA); it also mandates training and education for fire brigade members; which is
similar to that conducted by fire training schools, such as Texas A&M University; Maryland Fire and Rescue Institute; and The New York State Department, Fire Prevention and Control.
NFPA Standard 600 details the organization of the fire brigade with respect to standard operation procedures (SOPs), and classifies the primary function of the fire brigade. NFPA also provides guidance and requirements for brigades that are assigned as incipient-stage or defensive-only teams, as well as those assigned to perform advanced exterior or interior structural firefighting. Lastly, NFPA requires use of an Incident Management system and defines the different roles within the brigade.
Having these standards in place, however, does not mean that your industrial fire brigade still can’t learn a thing or two from their fellow municipal firefighters.
Indeed, they can – and should.
Coming together and getting to know the inner-workings of your local department is imperative. Why? Because it can help improve your industrial organization’s response system, not to mention enhance and extend your capabilities.
Brigade-to-Brigade Reciprocity
Creating a partnership for mutual aid is extremely important because it increases resources available in an emergency situation. Here are a few other reasons a reciprocal arrangement between municipal and industrial fire brigades is beneficial:
- Expands response capabilities on both sides
- Streamlines and standardizes response systems
- Reduces uncertainty
- Improves overall public safety
- Creates a “we’re all in this together” approach to bolster public confidence
Do not wait until you need the information, the resources, or the aid. Set yourself up now to align with firefighting best practices, and ensure that your organization is well positioned for a reciprocal partnership.
Building Better Relationships Checklist
Because the ultimate goal is the preservation of life and property, industrial fire brigades and municipal fire departments can, and should, work together.
Here’s a 7-point checklist to help safety directors and industrial fire brigade leaders initiate and deepen
industrial-to-municipal relationships:
- Conduct pre-incident planning. Assess and document systems, procedures, potential hazards, access to secure areas, etc.
- Invite co-participation in training and drills. Practice emergency procedures together, then evaluate the effectiveness, compliance, etc.
- Review response and rescue plans. Make sure everyone involved understands how to execute each and every plan.
- Get everyone in the same room. Invite key personnel to attend the same industrial fire schools or seminars that your brigade attends.
- Review equipment compatibilities. Ask for specifics, such as their SCBA pressures, fit testing procedures, etc.
- Share resources. Allow local fire departments to use your programs and facilities in support of their medical and physical fitness evaluations and respirator fit testing.
- Exchange information. Review your SOPs and organizational statements, as well as conduct in-service activities about site-specific hazards and specialized response.
About MSA
Because industrial fire brigades rely on equipment uniquely designed to handle their special hazards and exposures, MSA took its industry leading product, the G1 SCBA for Fire Service, and created a NIOSH-approved version for industrial applications. The G1 is easy to use, comfortable to wear, and ready to go in any emergency.
The G1 is a configurable SCBA designed to fit both the worker and the application. The user can customize his or her SCBA to meet personal preference, as well as those required by the job.
The G1 Platform includes both industrial and NFPA approved versions. While NFPA approved SCBA are generally used by first responders, the G1 Industrial SCBA is equally at home in construction, utility, chemical, and confined space applications. In these situations, the G1 offers options such as lighter weight carbon fiber cylinders and ergonomically designed shoulder and lumbar pads, which help reduce fatigue during extended shifts. Additional options include air-line attachments, quick-fill, and buddy breathing capabilities.
Please See OSHA 29 CFR1910.134 for further information on respiratory protection program guidance.
For more information on choosing the right SCBA or learn more about MSA’s complete line of respiratory products, https://us.msasafety.com/g1industrial.